
Elektro Sex Powerbox with LCD display. Item. # 7880.
Please read this manual carefully before using the equipment and understand the precautions.
This electro sex stimulator is a battery operated, pulse genera¬tor that sends electrical impulses to the electro parts/toys which can be connected to this powerbox and placed on any body part. Pressing the different keys can change the pulse width so that the treatment goes deep into the skin and into muscles. This electrical therapy will have a positive influence on your sex life. The powerbox can run 7 different programs.
Each program can be adjusted over 16 levels of intensity.
We wish you many hours of pleasure!
The RIMBA nr. 7880, powerbox set contains;
Accessories (Electrodes) which can be bought separately:
- # 7851 2 x Clamps uni-polar with lead wire.
- # 7852 2 x Breast/Body cups, bi-polar + 2 lead wires
- # 7853 Aluminium dildo, bi-polar, Æ25 x 155 mm.
- # 7854 Aluminium dildo, bi-polar, Æ35 x 165 mm.
- # 7855 Leather cock straps, bi-polar
- # 7856 Scrotum parachute + lead wire, bi-polar.
- # 7857 Aluminium anal plug, bi-polar, Æ35 x 140mm.
- # 7858 4 x self adhesive gel pads.
- # 7859 Egg small, bi-polar Æ25 x 60 mm.
- # 7860 Egg big, bi-polar Æ35 x 70 mm.
- # 7862 Aluminium cock ring / ball stretcher, bi-polar Æ35 mm. inside
- # 7863 Aluminium dildo, bi-polar Æ 25 x 125 mm.
- # 7864 Aluminium plug, balloon shape, bi-polar, Æ35 x 100 mm.
- # 7865 Aluminium dilator/sound, bi-polar, Æ 8 x 180 mm.
- # 7866 Leather cock tube with lace adjustable, bi-polar.
- # 7867 Silicone plug, small, bi-polar Æ 28 x 75 mm.
- # 7868 Silicone plug, big, bi-polar Æ 40 x 155 mm.
- # 7869 Silicone penis ring set, flat, uni polar, Æ 40 + 50 mm.
- # 7870 Silicone penis ring set, round, bi polar, Æ 40 + 50 mm.
- # 7871 Aluminium penis ring set (3 Pcs.) uni-polar, 36 + 42 + 46 mm.
- # 7873 1 self adhesive gel butterfly with pressing buttons connection
- # 7874 Aluminium dildo, bi-polar Æ 16 x 160 mm.
- # 7876 Conductive glove set complete
- # 7877 Aluminium dildo with double bullet, bi-polar Æ35 x 100 mm.
- # 7878 Aluminium dildo with 5 bullets, bi-polar Æ25 x 160 mm.
- # 7879 Aluminium Anal plug, bi-polar Æ30 x 90 mm.
- # 7881 2 x Self adhesive gel pads with pressing buttons connection.
- # 7882 Aluminium mini-plug, bi-polar Æ25 x 60 mm.
- # 7883 Leather cock strap with buckle, bi-polar
- # 7884 Leather cock harness with pressing buttons, bi-polar
- # 7885 Leather cock/scrotumstrap with elastic, bi-polar
- # 7886 Plastic dildo, bi-polar Æ25 x 145 mm.
- # 7887 Plastic mini plug, bi-polar Æ25 x 70 mm.
- # 7888 Aluminium Anal plug, bi-polar, Æ50 x 105 mm.
- # 3000 Electro contact Gel, 250 ml per bottle.
Warning and Precaution:
- Do not use if you wear cardiac-pacemaker.
- Do not use if you are pregnant.
- Do not use on eyelids.
- Do not use on broken skin.
- Avoid abrupt changes in stimulation control settings.
- Keep out of the reach of children.
- Turn the powerbox off before applying, removing or changing the electrodes.
- Stimulation of areas where bones are near the skin (knee, forehead or chin) can be painful for some patients.
- Stimulation controls, especially the level of intensity should be adjusted slowly.
- Do not immerse the stimulation-powerbox in water or other liquids.
Side effects:
Skin irritation may occur beneath or around the electrode sites. If skin irritation persists discontinue use immediately.
Recommendation:
Specifications of product:
|
Power supply |
4.5V, 3 x AAA |
|
Frequency |
1 - 100HZ |
|
Power Consumption |
Max. 180mw |
|
Output Power |
Max. 30mA into a 2K 0hm testing load of resistance |
|
Puls Widthe |
20-220 µS |
Names and functions of unit:
|
|
LCD screen display:
Accessories:

Safety Cautions:
Do not use together with the following medical electronic apparatus:
Malfunction or danger may occur for patients who have been using the above listed instruments together with this equipment.
Follow your doctor's advice for the patients who are under medical treatment or for sufferers from the following:
Instructions for Correct Operation:
Preparation before use:
.
![]() |
Open the lid, and place 3 x the 1.5 volt AAA batteries in the box. Note the + and – side of the batteries, close the lid tightly. Connect the lead wires, each set into a separate output jack.
Peel the film from the electrode.
Clean the oil and sweat from the area you want treatment with a damp cloth.
Paste two pieces of electrode on the part where you want treatment.
How to use the keypad
The inactive equipment time is 15 minutes. It will turn off when the time is up, and the LCD will turn off too. Now you should take off the electrode, and paste them onto the stick board backing. Please repeat the approach above if you want to use it again, press the ON key.
The intensity will reduce to level 1 if you change the mode of therapy when using the equipment. You can adjust to a suitable intensity again.
Please press the OFF key according to the method above if you want to change the area you are stimulating (ie. change the place of electrode)
Please take off the electrode after you have pressed the OFF key.
Please do not pull the lead wire if you want to take off the electrode from the body, first withdraw the pin.
Maintenance and Storage after usage:
Wipe the surface of the device clean with wet cloth. Do not use chemicals or alcohol.
Wipe the surface of Electrode Terminal clean with wet cloth and air dry. Do not expose it to the sun directly.
Keep out of the reach of children to avoid injury.
Keep the device away from moisture, high temperature, and direct sunlight.
Do not disassemble, repair or abuse the device.
Take out the batteries when the device is unused for a long period of time.
Causes and Solutions:
|
Status of the product |
Cause |
Solutions |
|
No LCD display after the batteries were installed.
|
Battery contacts may need cleaning. |
Check and remove the batteries. |
|
Batteries are used or polarity incorrect |
Check the cause and remove or re-install. |
|
|
The contact is bad between the batteries and the spring |
Expand the anode spring by using a suitable tool. |
|
|
No feeling but the LCD display is in working
|
Plug inserted in the jack firmly? |
Check and correct connection between electrode and chord, chord and jack. |
|
Is the lead and the electrode connected well? |
Connect them correctly. |
|
|
Stimulation becomes weak or tingling.
|
Is the electrode terminal stuck onto the skin correctly? |
Stick the electrode terminal firmly onto the skin |
|
Dirt on electrode terminal surface? |
Wipe clean or replace electrode terminal. |
|
|
Oil on skin |
Clean your skin. |
|
|
It stops output before the 15 minutes is up |
Batteries used. |
Replace batteries. |
|
Treated surface flushing red/flushing or tingling. |
Skin allergy against electrode terminal material. |
Check skin allergic history, for slight allergy, change position or shorten treatment time, for severe allergy, stop treatment or try desensitization therapy. |