MAE-Toys

Unisex Spiked Stainless Steel Heavy Duty Wrist Cuffs   Each slave needs to have their own custom made set of wrist shackles. These Spiked irons will put them in their place. Made from strong, cold, heavy steel allowing long use and wear. Our blacksmith custom makes this item by hand. Locks with a stainless steel allen screw, opens with allen key (supplied).The inside diameter is 6.0 cm, the width is 4.0 cm.The weight of this item is approximately 1155g.

Intim-Dusche von MAE-Toys Silberfarbene Intimdusche aus poliertem Aluminium ohne Schlauch. Abmessungen: Länge 14,5 cm, Durchmesser 17 mm Kommt mit 2 zusätzlichen Duschköpfen. Unentbehrlich für hygienische Analspiele Passt auf jeden Standard-Duschschlauch.

This innovative device, the so-called Impaler Ballstretcher from the house of Dr. Sado is an effective instrument of punishment for the unruly sub. Six inner thorns ensure painful stimulation of the scrotum. There's a steel cage for to lock up the scrotum., so your sub can't even touch his balles and just have to wait for further commands. Sadists, masochists and friends of CBT will really appreciate the features of this great evil ballstretcher with cage, because the heavy steel not only makes this ring a perfect ballstrecher but also an effective tool for sexual discipline.

Silicone Security for the CB-6000 and 6000S The KSD-G3 is designed to work with the CB-6000, CB-6000 Short and the CB-3000 (with minor modification). The G3 is a totally new design, different from the KSD-G2. It is incredibly easy to put on and take off and comfortable to wear! To make is work with the CB-3000 or Curve you will have to modify it by taking 1/16" off of the top inside of the locking pin hole so that it will drop down 1/16". It will not work with the CB-2000. The G3 incorporates two "ribs" that are designed to keep the shaft in place and not allow for pulling out. The front rib has a slight forward slant to push the shaft forward. The rear rib along with the front rib are designed to push down, thus preventing unwarranted pulling out by the male. All of the surfaces are smooth and edges are rounded for a comfortable fit and long-term wear. There is no more measuring... you will receive all three sizes for one price. The "A" is the largest, meant for a soft shaft width of about 1-1/2". The "B" is for a soft shaft width of 1-3/8", and the "C" is for a soft shaft width of about 1-1/4". KSD-G3 Security for the CB-6000 and 6000S The KSD-G3 is designed to work with the CB-6000, CB-6000 Short and the CB-3000 (with minor modification). The G3 is a totally new design, different from the KSD-G2. It is incredibly easy to put on and take off and comfortable to wear! To make is work with the CB-3000 or Curve you will have to modify it by taking 1/16" off of the top inside of the locking pin hole so that it will drop down 1/16". It will not work with the CB-2000. The G3 incorporates two "ribs" that are designed to keep the shaft in place and not allow for pulling out. The front rib has a slight forward slant to push the shaft forward. The rear rib along with the front rib are designed to push down, thus preventing unwarranted pulling out by the male. All of the surfaces are smooth and edges are rounded for a comfortable fit and long-term wear. There is no more measuring... you will receive all three sizes for one price. The "A" is the largest, meant for a soft shaft width of about 1-1/2". The "B" is for a soft shaft width of 1-3/8", and the "C" is for a soft shaft width of about 1-1/4". How to put the G3 on. There are three sizes of the KSD-G3. The "A" size is meant for a soft shaft measuring close to 1-1/2" or 38mm across. The "B" size is meant for a soft shaft measuring close to 1-3/8" or 35mm across. The "C" size is meant for a soft shaft measuring close to 1-1/4" or 31mm across. 1. Put the back ring on together with the back piece that has the two alignment posts and the small front piece that goes over the two pins. Now the large ring is complete. 2. Insert the locking pin through the ring and put the spacer on the locking pin. 3. Put some lubricant on the head and shaft. We even suggest using body wash or bar soap and working it into a lather and putting it on. 4. Put the CB-6000 tube on over the head and shaft, getting the head and shaft inside the tube as far as possible. Do not pull the tube onto the alignment pins and locking pin. Keep the tube separate from them for now. 5. Take one of the G3's. While the tube is on the head/shaft, angle the tube more downward while taking the G3 and inserting into the tube by slanting the G3 up and along the inside upper surface of the tube. While you are doing this, you will need to squeeze the two sides of the shaft on the outside of the tube so that you do not get skin pinched between the G3 and the tube. By slanting the tube down and angling the G3 up, you are wanting to keep skin from getting caught between the G3 and the upper inside surface of the tube. 6. Once you think you have the G3 in place, look to see if you can see the whole top side of the G3 and that no skin is trapped between the G3 and the tube. If skin is trapped, pull the G3 out just a bit, continue to angle it up against the inside top of the 6000 tube, and put it back in place. 7. When you have the G3 in place and no skin is trapped between it and the inside upper surface of the tube, you are ready to pull the tube over the alignment pins and the locking pin. 8. As you pull the tube up, make sure that you don't get pinched by the alignment pins, locking pin or G3. 9. Put the lock through the locking pin hole. 10. Flush out all lubricant. Our Cleaning Kit is a great way to stay clean at all times. Use some Q-tips to dry off inside of the tube. We do not suggest leaving soap and/or lubricant on the head/shaft while inside the tube. It is best to stay clean and dry while in chastity. Checking For Problems And Getting A Good Fit As you are deciding which G3 is right for you, make sure you have access to the key just in case you have problems. The way that you would know that the G3 is too tight is that you will have a difficult time urinating and there can be a change in color on your shaft. After a day of wearing the cage and G3, take the cage off and inspect the shaft for any problems. If you are able to urinate freely and there are no problems, you have the correct G3. Along with comfort is security. Are you able to pull out? If you can, you should consider using the next smallest G3. If you are between sizes, you can use some sandpaper and take off some plastic from a smaller G3 to open it up a bit to fit you better. Only take off about 1/32" or 1mm at a time from the front and rear ribs. Modifying the KSD-G3 There is a bit of play where the G3 fits into the tube. If that causes you trouble, you can bend out the sides of the G3 for a tighter fit in the tube. Also, you may want to get a tighter fit on the front tab by bending it down just a bit if you are between sizes. Take a container that can go into the microwave, like a coffee cup. Put about 3 inches of water in it. Put it in the microwave and bring it to a boil. Put the KSD-G3 into the cup and boil for another 30 seconds. Take out the G3 and now you can bend out the two sides and/or you can bend down the front tab for more security. Once you bend out the sides immediately put it back in your tube so that it will harden up to fit the inside of your tube nice and snug. You can modify the G3 as often as you desire. The important thing is that you are both comfortable and secure in your male chastity device.

Luminous Silicone Security for the CB-6000 and 6000S The KSD-G3 is designed to work with the CB-6000, CB-6000 Short and the CB-3000 (with minor modification). The G3 is a totally new design, different from the KSD-G2. It is incredibly easy to put on and take off and comfortable to wear! To make is work with the CB-3000 or Curve you will have to modify it by taking 1/16" off of the top inside of the locking pin hole so that it will drop down 1/16". It will not work with the CB-2000. The G3 incorporates two "ribs" that are designed to keep the shaft in place and not allow for pulling out. The front rib has a slight forward slant to push the shaft forward. The rear rib along with the front rib are designed to push down, thus preventing unwarranted pulling out by the male. All of the surfaces are smooth and edges are rounded for a comfortable fit and long-term wear. There is no more measuring... you will receive all three sizes for one price. The "A" is the largest, meant for a soft shaft width of about 1-1/2". The "B" is for a soft shaft width of 1-3/8", and the "C" is for a soft shaft width of about 1-1/4". KSD-G3 1. Put the back ring on together with the back piece that has the two alignment posts and the small front piece that goes over the two pins. Now the large ring is complete. 2. Insert the locking pin through the ring and put the spacer on the locking pin. 3. Put some lubricant on the head and shaft. We even suggest using body wash or bar soap and working it into a lather and putting it on. 4. Put the CB-6000 tube on over the head and shaft, getting the head and shaft inside the tube as far as possible. Do not pull the tube onto the alignment pins and locking pin. Keep the tube separate from them for now. 5. Take one of the G3's. While the tube is on the head/shaft, angle the tube more downward while taking the G3 and inserting into the tube by slanting the G3 up and along the inside upper surface of the tube. While you are doing this, you will need to squeeze the two sides of the shaft on the outside of the tube so that you do not get skin pinched between the G3 and the tube. By slanting the tube down and angling the G3 up, you are wanting to keep skin from getting caught between the G3 and the upper inside surface of the tube. 6. Once you think you have the G3 in place, look to see if you can see the whole top side of the G3 and that no skin is trapped between the G3 and the tube. If skin is trapped, pull the G3 out just a bit, continue to angle it up against the inside top of the 6000 tube, and put it back in place. 7. When you have the G3 in place and no skin is trapped between it and the inside upper surface of the tube, you are ready to pull the tube over the alignment pins and the locking pin. 8. As you pull the tube up, make sure that you don't get pinched by the alignment pins, locking pin or G3. ]9. Put the lock through the locking pin hole. 10. Flush out all lubricant. Our Cleaning Kit is a great way to stay clean at all times. Use some Q-tips to dry off inside of the tube. We do not suggest leaving soap and/or lubricant on the head/shaft while inside the tube. It is best to stay clean and dry while in chastity. Checking For Problems And Getting A Good Fit As you are deciding which G3 is right for you, make sure you have access to the key just in case you have problems. The way that you would know that the G3 is too tight is that you will have a difficult time urinating and there can be a change in color on your shaft. After a day of wearing the cage and G3, take the cage off and inspect the shaft for any problems. If you are able to urinate freely and there are no problems, you have the correct G3. Along with comfort is security. Are you able to pull out? If you can, you should consider using the next smallest G3. If you are between sizes, you can use some sandpaper and take off some plastic from a smaller G3 to open it up a bit to fit you better. Only take off about 1/32" or 1mm at a time from the front and rear ribs. Modifying the KSD-G3 There is a bit of play where the G3 fits into the tube. If that causes you trouble, you can bend out the sides of the G3 for a tighter fit in the tube. Also, you may want to get a tighter fit on the front tab by bending it down just a bit if you are between sizes. Take a container that can go into the microwave, like a coffee cup. Put about 3 inches of water in it. Put it in the microwave and bring it to a boil. Put the KSD-G3 into the cup and boil for another 30 seconds. Take out the G3 and now you can bend out the two sides and/or you can bend down the front tab for more security. Once you bend out the sides immediately put it back in your tube so that it will harden up to fit the inside of your tube nice and snug. You can modify the G3 as often as you desire. The important thing is that you are both comfortable and secure in your male chastity device.

Bondage - Hodenfessel, Acryl The Humbler Hoden-Fessel, -Quetsche und auch -Strecker, aus massivem Holz, geschliffen und lackiert. Der Humbler wird mit 2 Flügelschrauben schnell zur Venusfalle! Denn: Der Lust-Sklave wird in eine geile Besorg-Es-Mir-Stellung auf die Knie gezwungen; aufstehen unmöglich !!! MEO's Humbler zieht die Hoden gekonnt nach hinten (eigentlich ein sehr geiles Gefühl), macht es jedoch unmöglich aufzustehen. Gut für geile Solos im Liegen geeignet; zieht die Hoden nach hinten und macht "Ihn" noch praller! PS: Stell Dir dochmal vor, Du bist mit dem Humbler gefesselt und hinter Dir steht MEOs kleine Fickmaschine? Hmmmm?!?! Abmessungen: Breite ca. 40 cm, Höhe ca. 3 cm, Öffnung für die Hoden: oval, ca 50 mm breit und 10 mm hoch.  

Urethral Stretching Penis Plug   The glans ring features a movable handle and penis plug and is suitable for everyday use. The tight-fitting ring is placed directly below the glans and the end of the movable handle is inserted along with the stretching plug. The steel glans ring features a penis plug and a special design for secure placement. The plug is used for training and long-lasting urethra expansion. If you wish, it even can be worn over a long period of time. The stretching plug features a hole, allowing the wearer to urinate and ejaculate without needing to remove the glans ring. * length: 42.5 mm* effective length: 39 mm * diameter: 7 mm * ring: 25 mm and 30 mm* weight: 25 gr.

A red pacifier style gag with clear straps to instantly make your ABDL or sissy play a lot more kinky or to add an extra layer of humiliation to your bondage and BDSM sessions. The gag itself has a length of 4cm and is 3cm wide.

Impaler Locking Spiked Ball Stretcher specifications: Material: Stainless Steel Measurements: 1.22 inch inner diameter, 1.4 inch wide band. Screw points can be adjusted to protrude up to .5 inches into the interior of the ring 6 screw points for pressure from all directions Screw points can be removed and used as standard ball stretcher Also includes brass cylinder lock, 2 keys, and allen wrench

Black stretchy silicone cocksleeve with electropads in the molded scrotum for intense electrosex stimulation. Slide this one-piece penis sleeve on your cock and enjoy the pulsing sensation on your balls, either while fucking your partner or during masturbation.

The ultimate prison for his cock and balls! This clear ABS chastity device completely encloses the penis and the testicles in a ventilated, yet completely impenetrable shell preventing any form of touching.

Length: 65mm Maximum Ø: 45mm Opening Ø: 25mm Material: aluminum Weight: 119gr.

Dieser Keuschheitskäfig aus Kunststoff ist speziell für echte Keuschheitsliebhaber konzipiert. Das realistische Penisdesign sorgt für einen zusätzlichen visuellen Reiz beim Keuschheitsspiel. Der Käfig ist leicht, angenehm zu tragen und vollständig abschließbar. Geeignet sowohl für Anfänger als auch für erfahrene Benutzer.

Dieser Keuschheitskäfig aus Kunststoff ist speziell für echte Keuschheitsliebhaber konzipiert. Das realistische Penisdesign sorgt für einen zusätzlichen visuellen Reiz beim Keuschheitsspiel. Der Käfig ist leicht, angenehm zu tragen und vollständig abschließbar. Geeignet sowohl für Anfänger als auch für erfahrene Benutzer.

Dieser Keuschheitskäfig aus Kunststoff ist speziell für echte Keuschheitsliebhaber konzipiert. Das realistische Penisdesign sorgt für einen zusätzlichen visuellen Reiz beim Keuschheitsspiel. Der Käfig ist leicht, angenehm zu tragen und vollständig abschließbar. Geeignet sowohl für Anfänger als auch für erfahrene Benutzer.

The 45mm Length Vexing Cum-Thru Penis Plug with Four Grooves € 19,95. Manufactured from medical-grade, nickel-free stainless steel. The 45mm Length Vexing Cum-Thru Penis Plug with Four Grooves. Length: About 45mm maximum diameter parts: About 8mm, about 5mm in diameter through hole entrance diameter: 4mm with four grooves. The diameter of the ring is about 30mm and 25mm weight is about 30g.

Harness Metal Open Mouth Spider Gag Silence and submission are within a claw's grasp with this metal spider leg O-ring gag! The adjustable leather harness ensures your sub's face is firmly clasped in a punishing metal spider's embrace. Silence and style in one sleek little package at a price you just can't beat! Color: black Material: pu leather, metal

The Hush Silicone ball gag - Purple With the hush silicone ball gag you can emphasize during bondage play that silence is golden. The Hush ball gag is designed for both maximum comfort and silence. By utilizing corner straps, one can avoid the typical chafing from standard ball gags. The adjustable strap makes sure it fits snugly around the head. The gag is designed from pthalate-free silicone. Silicone ballgag with imitation leather strap adjustable from 17 to 22 inch / 43 to 56 cm.

Stainless Steel Red Rose Butt Plug Ø34 mm Beautifull Rose Flower Anal Bead Butt Plug made of high grade stainless steel Surprise your lover with a single red rose! Red Rose Anal Plug specifications: Measurements: 3.5 inches / 89 mm in total length, 2.5 / 64 mm insertable, 1.3 inches / 34 mm in diameter Material: Stainless Steel, ABS plastic.

Black silicone gag with breathing hole through the middle; you can rest assured your BDSM and bondage sessions are 100% safe no matter how long you wish the extend your pleasure! This gag features a buckle fastening at the rear.

This ring toy is a unique device that has three separate rings: one to hold the cock, one to hold the balls and one to wrap around the whole package for extra stimulation and security. The unique design gives the wearer a bold and extreme look

PVC Double Bondage Fist Mitt This Double Fist Mitt keeps two fists, palm-to-palm, bound and immovable in one mitt. It has two Pu-leather wrist belts with two chrome-plated D-rings, and two chrome-plated steel buckles. One size fits all

Aluminium Juwel Analplug Silber Wunderschönes Analjuwel aus Aluminium. in drei verschiedenen Größen: -klein ⌀ 2,8 cm (an der breitesten Stelle) ⌀ 1 cm (an der schmalsten Stelle) 7,9 cm lang -mittel ⌀ 3,4 cm (an der breitesten Stelle) ⌀ 1,4 cm (an der schmalsten Stelle) 9,5 cm lang -groß ⌀ 3,9 cm (an der breitesten Stelle) ⌀ 1,6 cm (an der schmalsten Stelle) 10,2 cm lang Erhältlich in zwei verschiedenen Farben: Rosa und Dunkelblau

Manufactured from medical-grade, nickel-free stainless steel. A total length of about: 90mm effective length: About 60mm  diameter: 10mm  groove diameter: 5mm  two black silicone ring with a diameter of about 30mm and 25mm  weight: 35 grams.

Padded Black/Pink Blindfold by MAE-Toys Comfortable imitation leather blindfold with long velcro panels so you can easily adjust it to a perfect fit. The thick, soft padding ensures the wearer's vision is completely obscured. This good design assures that you can't see anythig!

Multi Purpose Anal Plug with Cock Ring € 39,95 Product material: Anal hook (stainless steel), anal plug (high quality space aluminum alloy). Package content: Anal hook x 1, anal plug x 3, lifting ring x 1 Weight: 456g

Stainless steel fixed scrotal anal hook round ball Ø 45mm The scrotum anal hook is a unique device that not only gets your cock stiff, clamps your scrotum but also keeps your ass filled. A CBT system with a scrotum attachment to which a Ø 45 mm anal plug is added. The anal bullet is made of polished stainless steel

Stainless Steel penisplug Ø8mm Manufactured from medical-grade, nickel-free stainless steel. Cum-Thru Penis Plug ZA004 The total length of the inserted length: 76mm: 60mm: 6mm minimum diameter maximum diameter: 8mm diameter: 4mm weight: 35g

16oz / 450 g. Cock & Ball CBT Weight Manufactured from medical-grade, nickel-free stainless steel. Next time you tell your partner or slave that they should carry their weight in this relationship, make them mean it with this Cock Ring and Ball Weight set. Simply attach the cock ring around the cock and balls (at the base) and lock it (using a standard padlock -- sold separately). If you wish then you can just place the cock ring around the balls alone, this turns the product into a pure ball stretcher. Then using the nickel snap, attach the ball weight and chain onto the cock ring. You will enjoy watching your partner roam around carrying extra weight and while your partner could enjoy the added pressure on his cock and balls. For extra fun, you can attach a second ball weight to the snap link and create additional pressure. Size for the cock ring: 1.75" / 45 mm in diameter.

Heavy latex hood with Latex Tongue Gag by MAE-Toys Features a long neck which easily tucks under your shirt or latex suit!Although masculine in style, it can be worn by any gender and is shaped for a snug fit.Can be made more shiny using latex polish/shine. specs: size tongue 58 x 58 mm Color Black (latex hood), Red (latex gag) Available in one size (60 cm head)

Inertia Flexible Penis Plug € 19,95. Manufactured from medical-grade, nickel-free stainless steel. The Inertia Plug offers stimulating play for men. The Inertia Plug is a stainless steel urethral item that features interchangeable head rings and a stainless steel tip. The shaft is made of hollow silicone offering flexibility and comfort (for long-time wear). The plug also has a cum-thru hole and is made entirely of the most hygienic, allergy-safe, and high quality materials.

available in sizes: Small / Medium - 25.6 - 33.5 inches / 65 - 85 cm, Large / XLarge - 31.5 - 40.2 inches / 80 - 102 cm

The Chastity Steel belt for men CB “mae-700” is very comfortable to wear thanks to its exceptional combination of belt and clamp. Its licensed safety and security lock opens free only with the right key. The CB is made out of stainless Steel and can’t be debased by water or urine. Because the user doesn’t need any chain between his legs he has the very best freedom of his movements. A non authorized escape is – however - impossible. As soon as it is fitted and gripped, the measures between the pipe and the frame make an impossible wriggling.

Metal Hollow Flushing Anus Plug BLACK With a little lube or cream , the Permanent Ass Plug slips past the sphincter. Once the thickest part is over, the rest of the butt plug slides in on its own. Apart from the exciting feeling our massive Permanent Ass Plug creates as it enters, expanding it provides for intensely pleasurable stretching of the sphincter, gentle expansion of rectal region and stimulation of the prostate in men. Women can also insert the plug for rectal expansion and intensification of pleasurable sensations. Once the butt plug is fully inserted, our Permanent Ass Plug can be opened. A continuous opening of approx. 16 mm is formed, perfect for fun, fantasy-filled play. Dimensions: Total length 115 mm, insertable length about 80 mm. Thickest part of the butt plug= 38 mm, thinnest point = approximately 25 mm, weight: 170g.

The Libertine Faucet Plug. Manufactured from medical-grade, nickel-free stainless steel. The Libertine Plug offers visual and sexual appeal for those engaged in urethral play. When inserted, into the cock, the Libertine Plug visually looks stunning. This particular plug takes play to a new level by having six ‘sprinkler‘ holes on the outside. Made of stainless steel, the plug is smooth for easy insertion and can also be used for temperature play. Heat or cool the plug to a desired temperature and enjoy new sensations. There is a thru-hole available for easy cleanup and extended wear.

Chimera Adjustable Flying Rings Nipple Clamps Enjoy tempting nipple play with these large ring nipple clamps These nipple clamps have a tweezer-style design and feature large rings for hanging weights, string, carabiner or simply for teasing by pulling. As nipple clamps, they offer functionality and comfort thanks to a sliding ring (to change the pressure) and a vinyl coating for comfort and better grip.

Too much talk is a turn off, don't you agree? Here's a sexy way to silence a naughty, talkative slave. Strap them up with our 2” Large Black Silicone Breather Ball Gag Trainer with Nose Hook! Fits from 14" up to 20"

Extra spiked ring for chasityt devices: - mae-sm-043 - mae-sm-051s - mae-sm-051l - mae-sm-062-s - mae-sm-062-l - mae-sm-066-50 - mae-sm-074 - mae-sm-074-l - mae-sm-112 - mae-sm-114 - mae-sm-128 - mae-sm-196 - mae-sm-207 - bhs-339 - bhs-340

23.5 inches / 60 cm long and approximately 0.4 inch / 10 mm thick. The cane has a firm grip handle

Lock that cock up in style! This fiery red and black chastity cage ensures comfort and security thanks to its lightweight construction, easy to use design and a generous selection of accesoires

The model is made of durable and lightweight polycarbonate and the cage has vented slots for quick drying. The bottom opening allows to ease of use at the urinals.

Soft Rubber Ball Gag Harness Ø 5.5cm Keep your partner quiet with this Ball Gag Harness! Sometimes, when you‘re in the midst of a stimulating session with your partner not being able to hear them can be just as effective as hearing their every word. This Ø 5.5 cm ball gag harness is an effective way to keep your partner‘s mouth stuffed and reduce the amount of noise they can make. The harness uses comfortable immitation leather straps to stay secure around the head. The ball is then placed inside of the mouth, keeping your partner silent. The harness uses several adjustable straps for a secure fit. Imagine the possibilities when you have your partner bound and unable to speak.

Padded imitation Leather Fist Mitts These Padded imitation Leather Fist Mitts are wonderful at containing busy hands and fingers. These mitts are made of fine pu-leather embroidered over soft padding. Each of the padded mitts has a large D-ring on a wide buckle strap for cinching down on the wrist and attaching to multiple points for varied bondage possibilities. Designed for a tight fit, this design forces the wearer to keep the hand in a fist. Removing the ability to open the hand is a higher level of restrictiveness and can be appreciated by the bondage lovers. Also ideal for petplay!

Small Black Silicone Genitals Whip by MAE-Toys Total length 8.7 inch / 22 cm length of silicone strands: 6 inch / 15 cm Black plastic grif, made of 6 Beads 2.8 inch / 7 cm

Latex leopard animal mask with back zipper This 100% natural latex product is cut and handmade just for you. It is specially designed to pull-you-in and push-you-out in all the right places. The thickness of 0.40mm(0.016inch) is optimal for both flexibility and endurability, so one-size (fits most). It feels just like your second skin!

Cock Head Silicone Mouth Gag with Figured-belt Shove a cock in your sub’s mouth to shut them up! Tighten the strap around your little slut’s face so that they’re trapped and vulnerable. You will love the sounds of their stifled begging and helpless moans. The penis gag will wrap around your partner’s face, creating the BDSM fantasy that gets you off! The penis gag is tasteless and odorless so that your sub can focus on the sensations you put them through. The silicone material is non-porous, cleaning easily with mild soap and warm water. Cock Head Silicone Mouth Gag specifications: Silicone dildo plug Length about 7cm, about 3.5cm in diameter. Weight: 135g.

Versatile ceebee-6000s  model chastity device, finally available in pink, ideal for not only ABDL and sissy play but a great addition to any BDSM or chastity collection.